Tag: 192.168.1.1

network address and host address

The network address and host address are the logical address of the nodes on the Internet in the network.

The Internet is composed of interconnected hosts and routers with LAN. Each device has a physical address connected to a network with a MAC layer address, each node has a logical network address. Because a network address can be assigned to any network device logically, it is also called a logical address.

The network address can be divided into two parts: the network number and the host number, which are used to identify the network and the equipment in the network. Using different network layer protocols, the description of network address is different. IP protocol uses 32 bit binary to represent network address, which is generally called IP address. The MAC address is used for network communication, and the network address is the logical address used to determine the location of the network device.

IP address is a unique identifier for each host or device used in the TCP/IP network address, IP address by 32 (a total of four eight byte binary form). The IP address is divided into two parts, the left part of the network number used to identify the host network; the right part is used to identify the host itself, this part is called the host address. Hosts connected to the same network must have the same network number.

Very important host address: 192.168.1.1 and 192.168.0.1

192.168.1.1

192.168.1.1 is the address of an array of most wireless model routers, similar to 192.168.0.1 or 10.0.0.1. This router gateway is a private IPv4 network address, it can be used by a home router to set up the default gateway. In a network, just one piece of equipment must use 192.168.1.1 to keep address conflicts at bay.

How to login to 192.168.1.1

  1. To access the management console of your router copy http://192.168.1.1 into your web browser’s URL address
  2. Once you reach the router admin login panel introduce your username and password. If you don’t know them, you can find them in this default username and password list or set up new ones by following this article.
  3. Inside the admin panel you will be able to change all kinds of setting such as: DNS, IP allocation, Routing and many more.

Why am I unable to access 192.168.1.1?

If there is a problem connecting, first identify if your router’s IP address is 192.168.1.1. Some people tend to make a mistake and type 192.168.l.l . To find your router IP address check our router IP address list or our article on how to find your router IP address in various operating systems.

If the gateway address is 192.168.1.1 and it doesn’t work, make sure you have turned off any firewall or antivirus running in the background.

Router User and Password List

You can also select your router’s default admin and password from the following list:

How to change my router password?

In order to change the password, log in to the router control panel by enter your router default IP address. On entering username and password for the router, router administration interface will load. Find the administrative tab in the router administration interface. Click on the link ‘Change password’. Type the new password twice on the interface.

192.168.1.254

192.168.1.254 ip address enables you access your wireless router or ADSL router. If you need to access your router without using a wire, the ip address code 192.168.1.254 makes it possible.

How can I login to 192.168.1.254?

To do that, you need to enter the address http://192.168.l.254 in your browser. You can manually type this or simply copy the address to your browser toolbar. The system will prompt you to enter your user name and password.

Default Router Username and Password List

Check any router’s username and password from the list below:

What to do if I enter the wrong password?

Such as 192.168.1.1 or 192.168.0.1, in case you enter the wrong information, you won’t be given access. You will need to reset the system before you enter the password again. For that, you will need to press the reset button with a needle for a while (10-15 seconds). Once the device on the reset mode, you will be required to feed in the password information fresh.

What to do if I do not know my password?

You will find a list of default modem passwords online. It should not be a problem to get one.

What to do if I don’t see router administration interface?

In case you do not find router administration interface at http://192.168.1.254/ the manufacturers have probably configured the router to use a different IP address. If you are using Wi-Fi network to connect to the device, try switching to wired connection to ensure there are no connectivity related issues.

It is a fairly easy process and you are not likely to encounter any major problem while using 192.168.1.254 ip address for accessing the ADSL modem.

192.168.1.2

192.168.1.2 serves as the default IP address for home broadband routers, enabling you to manage your wireless router panel. Accessing the administration panel allows you to alter the configurations related to the router. As 192.168.1.2 is a private IPv4 network address, you cannot use the address from outside your home network. You have no option but to use the router’s public IP address.

How can I access 192.168.1.2?

  1. To access the IP address, you need to type http://192.168.1.2 manually on the address bar of the browser or copy-paste the IP
  2. A login panel will show up. Enter your credentials. If you don’t have them you can consult those for your router in this article. You can also learn how to recover your password if you lost it.
  3. You can use 192.168.1.2 to change the settings in the administrative panel. Routers can be desirably configured to make some machines on a private network connect to the Internet.

How can I find the password?

The default password for 192.168.1.2 is set and it can be easily found in our article about router passwords. However, if you have been in hurry and enter the wrong password, what you need to do is to reset it. All devices have tiny button that you need to press for 15 odd minutes using a needle. It will reset the modem and you can enter the password again. 192.168.1.2 is set to the default of various routers and access points. In fact, any on a router or local network can be set to use 192.168.1.2. This helps in avoiding the address conflict as a device would use it only on the network.

Default Router Username and Password List

Check any router’s username and password from the list below: