Tag: 192.168.1.2

192.168.2.1

192.168.2.1 IP address is the default access point for several home broadband routers. These include many Belkin and SMC models. When first sold, access points or IP addresses are set on devices by brands and models. However, you can configure any router or computer on a local network to change these specifications.

Login to router IP Address 192.168.2.1

Your router is using 192.168.2.1 and you want to log in to the router’s console. To achieve that, use the the local network by pointing a Web browser to http://192.168.2.1/. Take care not to type the address http://www.192.168.2.1.

When the connection is established, the user will be prompted to introduce an administrator username and password in order to complete the login process. If the router gets disconnected from network (offline), the browser will respond with an error message: ‘This webpage is not available’.

Some Internet service providers would supply networking equipment that enables administrators to type a name in the browser instead of the IP address.

Default Router Username and Password List

Check any router’s username and password from the list below:

What restrictions do I face when using 192.168.2.1

As 192.168.2.1 is a private IPv4 network address, you can’t use it to link to a router from outside your home network. For that purpose, you have to use the router’s public IP address. If you need to set up two routers on your home network simultaneously, these have to be set up with different addresses. To confirm the address a local router is using, you can look up the default gateway set on a device currently connected to it. Alternatively check out our tutorial on how to check your router’s IP address.

How can I change the address 192.168.2.1?

You can configure and customize your router’s specifications (IP, passwords…) within the Admin Console. The Administrator Console of a router provides options to change the default local address along with other IP settings.

How can I reach 192.168.2.1?

In order to access the administration panel of your modem, you need type http://192.168.2.1 manually on the address bar of the browser or duplicate the IP. In case you use the wrong password, you need to reset the device. This can be done by pressing the reset button at the back of your device for a while, for more info about this last point click here.

192.168.1.2

192.168.1.2 serves as the default IP address for home broadband routers, enabling you to manage your wireless router panel. Accessing the administration panel allows you to alter the configurations related to the router. As 192.168.1.2 is a private IPv4 network address, you cannot use the address from outside your home network. You have no option but to use the router’s public IP address.

How can I access 192.168.1.2?

  1. To access the IP address, you need to type http://192.168.1.2 manually on the address bar of the browser or copy-paste the IP
  2. A login panel will show up. Enter your credentials. If you don’t have them you can consult those for your router in this article. You can also learn how to recover your password if you lost it.
  3. You can use 192.168.1.2 to change the settings in the administrative panel. Routers can be desirably configured to make some machines on a private network connect to the Internet.

How can I find the password?

The default password for 192.168.1.2 is set and it can be easily found in our article about router passwords. However, if you have been in hurry and enter the wrong password, what you need to do is to reset it. All devices have tiny button that you need to press for 15 odd minutes using a needle. It will reset the modem and you can enter the password again. 192.168.1.2 is set to the default of various routers and access points. In fact, any on a router or local network can be set to use 192.168.1.2. This helps in avoiding the address conflict as a device would use it only on the network.

Default Router Username and Password List

Check any router’s username and password from the list below: